Teco Tr10 Chiller Manual
. operators’ manual for all models: TR10 TR15 TR20 TR30 TR60 Page 1.About This Manual This manual covers basic operation and maintenance for all current models of the Teco SeaChill under normal operating conditions. For more detailed information or uses not covered in this manual please contact us. Safety Specifications 1/12 Teco chillers are designed and built with safety as a prime consideration; industry-accepted Amps safety factors have been used in the design. Each chiller is inspected at the factory for Watts safety and operation. Any necessary adjustments are made before shipment. Features Ventilation Grate Air Filter Control Panel In Port Out Port Power Socket UV Port(s) (Optional Accessory) Heater Port(s) (Optional Accessory) UV Ballast(s) Compressor Heat Exchanger TR10 Condenser Vent TR15 Fan(s) TR20 TR10 TR15 TR20 TR30 TR30 TR60 TR60 Page 6 Page 7.
Instruction manual TK3000-6000-9000: TK3000, TK6000. TR10, TC10: 1.24 MB: November 03. Chiller Accessories Catalogue: UV-C Kit. Teco Tr10 Chiller Manual. Read online or download PDF • Teco US TR20 User Manual. Chiller Teco. TR-10 Aquarium Chiller. TECO SeaChill Manual.
Receiving and Inspection Included Parts List Inspect the chiller closely upon receipt. Record any indication of damage and contact seller immediately.
TR10 TR15 TR20 TR30 TR60 Save the box and packing materials In / Out Plugs If your chiller ever needs to be repaired or serviced, you will need to ship it in the original box. Located in the in/out ports of the chiller (2) Attached to chiller Record your Model and Serial Number for easy reference. Optional Parts Installation and Assembly ALL MODELS Teco SeaChill Chillers are intended for indoor operation. Do not expose chiller to outside elements or direct sources of heat. Maximum allowed ambient temperature is 95°F/35°C. Do not operate chiller in temperatures over 95°F/35°C.
Valve Assembly Plumbing TR10 TR15 TR20 ALL MODELS SeaChill Chillers can be plumbed using flexible plastic tubing or hard Unscrew the Ring Nuts for the plumbed using PVC. Shut off valves from the chiller inlet and outlet.
York Chiller Manual
Remove the In/ Flexible Tubing Out plugs from the In/Out ports of the chiller. Typical Installations Operating Your Chiller ALL MODELS ALL MODELS Submersible Pump Installation Closed Loop Starting Your Chiller Water is being run through the chiller by a separate pump and returned Open the Shut Off Valves by rotating the valve back to the sump. Control Panel Silent Mode TR10 TR15 TR20 All Teco Seachill models share the Press “SILENT” when the chiller is on.
Silent mode slows the same control functionality. The ventilation fan, causing the chiller to become quieter. Press “SILENT” following directions apply to all models, again to turn silent mode off. Cleaning the Air Filter Removing Housing TR10 TR15 TR20 Remove the filter from the bottom of the chiller. Turn off and unplug the chiller. Remove shut off valves by unscrewing ring nuts.
Remove housing ring nuts and gaskets. You may need to use a wrench or pliers to loosen the ring nuts,we recommend placing a cloth over the ring nut to prevent damage to the plastic. Changing the Fuse Changing UV Bulb TR10 TR15 TR20 TR10 TR15 TR20 Fuse Clip Fuse Holder It is time to replace the UV Lamp Turn off and unplug the chiller before changing the fuse. When the AL2 code flashes on the control panel Remove the fuse holder from socket using a flathead screwdriver. Tighten ring nut over quartz sleeve Remove rubber stopper from the quartz sleeve Replace housing and air filter. Replace ring nuts and valves. Unplug the old UV lamp from the 4-pin socket., remove and discard lamp.
Carrier Chiller Manual
Open shut off valves, restart pump and check for leaks. Turn UV on by pressing UV button. Slide new UV lamp into quartz sleeve, plug into 4-pin socket, return rubber stopper into sleeve Hold down UV button for 10 seconds to reset AL2 code. Remove the obstruction or create a ventilation hole.
Ventilation Grate Broken Fan Contact info@trademarkaquatics.co.uk Replace the UV lamp with an appropriate TECO UV UV lamp It is time to replace the UV Lamp replacement, available at www.tecous.com when the AL2 code flashes on the.